a meter is to be bolted to a switchboard. the meter studs that will fit into the holes on the switchboard are 0.4365 inch in diameter. express the hole sizes in decimal form if they are to be 1/32 inch larger in diameter than the studs.

The hole’s size would be 0.46875 inches in decimal form.

Bolting a meter to the switchboard is one of the most frequent switchboard installation chores. The switchboard’s holes must be the same diameter as the meter studs, which in this case measure 0.4365 inches in diameter. The switchboard’s holes should be represented in the decimal form if they are to be 1/32 inch bigger in diameter than the studs.

The meter studs can be inserted tightly as a result, preventing them from becoming loose over time. Additionally, it guarantees that the connections between the two are trustworthy and safe and that the meter is firmly anchored to the switchboard.

Therefore, the hole’s size would be 0.46875 inches in decimal form.

0.46875inches in decimal form.diameteras the meter studs, which in this case measure0.4365inches in diameter. The switchboard’s holes should be represented in the decimal form if they are to be1/32inch bigger in diameter than the studs.studscan be inserted tightly as a result, preventing them from becoming loose over time. Additionally, it guarantees that theconnectionsbetween the two are trustworthy and safe and that the meter is firmly anchored to theswitchboard.0.46875inches in decimal form.Studshere:#SPJ4